Year: 2018
Length: 53′
Engine/Fuel Type:
Located In: United States
Hull Material: Aluminum
YW#: 80031-3137436

Current Price : US$ 1,200,000

  • THE ALL NEW BENSHIP 16 IS 100% ALUMINUM CONSTRUCTION.  RICCARDO BENETTI / ARCHITECT
  • EXCLUSIVELY IN THE USA BY MIAMI INTERNATIONAL YACHT SALES

DEALER – EAST COAST USA

MIAMI INTERNATIONAL YACHT SALES

305-857-8939 / Bob@MiamiYS.com

www.MiamiInternationalYachtSales.com

 

Additional Specs, Equipment and Information:

Dimensions
LOA: 53 ft 0 in
Beam: 15 ft 4 in

Engines
Cruising Speed: 30 knots
Maximum Speed: 35 knots

Tanks
Fuel Tanks: Aluminum (530 Gallons)

Additional Information

SPECIFICATION

  • Vessel: motor yacht with a planning hull, twin screw propellers and twin diesel engines
  • Builder: Benetti Sail Division Shanghai Shipyard Corporation
  • Exterior Designer:A-Cube
  • Naval Architect:Riccardo Benetti  /CLM Design
  • Workshop drawings:A-Cube
  • Classification: RINA PLEASURE CE B CATEGORY
  • Material of Hull: 5083 H 111 aluminium
  • Warranty: 2 years from yacht’s acceptance

 

DIMENSIONS

Overall length
m – 16.030

Length at water line
m –  13.470

Beam O.A.
m –  4.650

Height from water line up to radar arch
m –  3.725

Design draft approx
m –  1.20

Inside height at main deck
m –  1.90

Light Ship displacement (indication)
ton –  20.5

Fuel tanks capacity
m3 –  2.00

Fresh water tanks capacity
m3 –  0.75

Black and grey water tanks capacity
m3 –  0.35

Guest’s bed places
n° –  4+1

 

PERFORMANCE

Max speed at 1/3 load conditions A)
Kn –  35.00

Cruising speed A)
Kn –  30.00

Range at cruising speed A)
NM –  270

Engines installation A)
IPS

 

PROPULSION SYSTEM

Main engines A)
Volvo Penta
2 x IPS 950 D

Max power A)
Hp@rpm
725@2500
Generator

Type
1 x 12 Kw
Propeller
Kw
2 x 5 blades

The construction of the hull and all items will be such to reduce to a minimum all vibrations that may damage the hull’s structure or the equipment or that may interfere with the equipment operation or affect the on-board comfort.

Special attention will be paid to supplying suitable foundations for the main engines, engine room machinery and equipment, generators, accessories and reduction gears.

A lubricating pump will be fitted on each gear box in order to avoid any damage, due to propeller shaft turning in case the boat is sailing with one engine off.

 

INSULATION AND SOUNDPROOFING

Using means appropriate for a yacht of the highest quality and considering all sources of noise, whether mechanical, hydrodynamic or other sources, the following noise levels shall not to be exceeded at trial’s conditions.

All on-board noise measurements shall be carried out according to ISO standard #2923, “Acoustics Measurements of Noise Onboard Vessels”.

During measurements, the yacht shall be fully furnished and outfitted with draperies and linen.

Noise limits
dB[A] ± 2 dB

Cruising at 30 kts

1 generator in full use
Lower deck

dinette
82
 Master cabin
78

Upper deck

Wheel house
83

These maximum noise levels apply for relative conditions:

  • Main engines (as required for  cruising speed )
  • The yacht fully equipped with upholstery, carpets, curtains, loose furniture, linen
  • Entertainment equipment and nautical communication equipment shut down
  • The yacht in half load condition with fuel, wastewater and freshwater at 50% capacity
  • Wind force not exceeding Beaufort scale 2
  • Sea state Beaufort sea state II
  • All interior doors, exterior doors and windows closed

 1.  ACOUSTIC PRIVACY.

The design requirements for noise reduction between cabins [doors closed] shall be taken into consideration, especially in the Owner’s cabin, to reduce transmission of voices from and to any of the other areas.State of the art” super yacht standard techniques shall be applied throughout the yacht to achieve the acoustic targets. Special attention shall also be applied to the laundry area in particular the aft bulkhead.

The exterior paint procedure for hull and superstructure will be according to BOERO cycle

Top coat final painting cycle will be AWLGRIP for the hull and AWLCRAFT for the superstructure

Metallised paint as extras

WORKMANSHIP

Electric welding shall be properly performed by CS certified and experienced welders, to the best yacht’s building standards.

Finished shell and deck plating to shall be fair and smooth.

Fairness of the hull / superstructure plating (on the 90% of the total surface), before any filler is added, shall be such that a stiff even batten 2 meter in length (2mm x 25mm x 2.000mm) can be held against the hull surface with less than 9 mm and against superstructure surface with less than 8 mm of clearance at any point. For avoidance of any doubt the measurement shall be taken in between two welding of the edges of the plates.

 

OTHER TECNICAL INFORMATION

  • 1 anchors 35 kg , chain 8/10 mm.
  • 1 windlass with warping ends MZ Elect. ( 1.7 kw )
  • 2 capstans  MZ Electr.  (1.2 KW each)
  • Electro hydraulic telescopic gangway by  BESENZONI model , size not less than 2.80 x 0,45 m, teak wood grating and stainless steel stanchions, hand-fitted or retractable
  • Folding Handrails and check rails of polished 316 L stainless steel squared/rounded  pipes  Sanitary system vacuum. WC – type PLANUS, independent vacuum operation and fresh water feeding ( see on catalogue )
  • Grey water flushed to PLANUS s/steel box, one in each compartment
  • Bilge/Antifire Pump GIANNESCHI ACB 80 E + N°2 GIANNESCHI Mini Sub 3700
  • Sewage water Pump GIANNESCHI MV44 24 v.
  • Fresh Water Double Pumps GIANNESCHI Ecoinox 1 CE 24v+220v
  • Hot water circulating Pump GIANNESCHI UP 20-30N 220 v
  • Air Conditioning Pumps GIANNESCHI N°1 CP30 220 v + N° 1 CB 22-95 220 v

 

AIR CONDITIONING AND VENTILATION

  • Air conditioning 42.000 BTU (cooling/heating) in all cabins. Main unit fitted in engine room, One A/C fan coil fitted in the engine room and in the instruments box in the wheelhouse
  • Mechanical ventilation exhaust: toilets and engine room
  • Engine Room Ventilation Gianneschi

 

ELECTRICAL SYSTEM

All electrical equipment, wiring, fixtures etc and its installation shall be in accordance to the Classification Society rules

220 V AC mono-phase system – 24 V DC / 50 Hz system.

2 main sets of batteries (600A / 24VDC service and 240A / 24VDC for engines start + 1 battery 60 A for gen set starting)

Led spot lights BCM in all cabins

Anti intrusion alarm ( Provision only )

 

ENTERTAINMENT AND COMMUNICATION EQUIPMENT

1. Wheel House/Living:

  • 4 square in-ceiling speaker 5â€
  • 1 Autoradio Sony
  • 1 32†LED TV monitor
  • Sintoamplifier with bluRay player
  • Decoder Sat HUMAX or similar high definition (Provision only)
  • Video on demand Apple TV (Provision only )

2. Guest cabin:

  • Sintoamplifier 2.1 channel
  • LED TV 26†16/9 FULL HD
  • Decoder Sat HUMAX or similar standard definition (Provision only)
  • 2 square in-ceiling speaker 5â€

3. Owner’s Cabin:

  • Sintoamplifiers 2.1 channel
  • LED TV 26†16/9 TV FULL HD
  • Decoder Sat HUMAX or similar high definition (Provision only)
  • Video on demand Apple TV
  • Sound distributed with 2 in-ceiling speakers 5â€
  • TV The satellite system: SEATEL antenna Mini ( Provision only)

3. The reception Rf/Radio (AM/FM) is submitted a omni-directional Naval Antenna

4. The reception of terrestrial TV is submitted by a Naval Mark 32 ALC antenna

 

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.